FrymaKoruma MaxxD

FrymaKoruma MaxxD

MaxxD
  Usable volume (l) Power (kW)
MaxxD Lab 12 9,0
Data sheet    
MaxxD 200 160 22,0
Data sheet    
MaxxD 400 300 22,0
Data sheet    
MaxxD 700 500 22,0
Data sheet    
MaxxD 1300 1100 45,5
Data sheet    
MaxxD 1800 1500 45,5
Data sheet    

FrymaKoruma Homogenizing, Mixing and Dispersing Unit, Type MaxxD


Vacuum processing unit for the cost-effective manufacture of emulsions and suspensions over a wide viscosity range.

Key Advantages

  • Dual concept results in the optimum homogenizing tool for every product
  • Reduction of process time up to 60%
  • Aseptic design for fast and efficient cleaning
  • CIP/WIP
  • High product reproducibility
  • Perfect de-aeration
  • Efficient heat exchange
  • Easy exchange of the homogenizer
  • Standardization results in short delivery times
Technical Data
Utilities
  • Power supply standard 400 V / 3 phases, 50 Hz
  • All other voltages and frequencies available upon request
Material Specifications
  • Parts in contact with the product made of stainless chrome-nickel steel 1.4404, .4435 / AISI 316L or 1.4571 / AISI 316Ti
  • Material other parts 1.4301 / AISI 304
  • Elastomers, EPDM or other materials (FPM, etc.)
Operating Conditions
  • Temperature: from 0° - 140°C
  • Air humidity: from 0 - 80%
  • Ambient air: as dust-free as possible

Functional Description

Solids and liquids with good flow properties are fed direct to the homogenizing tool via the vacuum unit (which also prevents the undesired ingress of air) and are deglomerated down to 1 µm in size and then dispersed. The recirculation line returns the product back to the vessel. This, plus the special scraper-stirrer, generate the additional macromixing by means of vertical convection. The conical shape of the vessel floor routes the product to the single-chamber homogenizing system, where the entire procedure is repeated. The machine is emptied either by means of a discharge valve at the homogenizer or via the recirculation line downstream of the homogenizer.
Dependent on the requirements, the production system can be equipped with a colloid head or a toothed rotor/stator system.

Specification of Standard Components

Mechanical
  • Single-acting mechanical seal (double-acting as option)
  • Manually tiltable lid (MaxxD Lab)
  • Automatic lid opening system (MaxxD 200 up to 700)
  • Vessel lid securely bolted, equipped with jack rings (MaxxD 1300 up to 1800)
  • Scraper agitator
  • Vortex breaker
  • Sight glass with illumination
Electrical & Electronic
  • Motors splash-proof IP 54
  • Other protection types upon request
  • SPS-Simatic C7-633
Safety
  • EC Declaration of Conformity as defined in the Machinery Directives 2006/42/EG, Annex II A
Options
  • Double- and insulated jacket
  • Other surface qualities
  • Temperature control for double jacket
  • Pneumatic fittings
  • Dosing units
  • Several tanks and hoppers for feeding
  • Additional recirculation line with sine pump
Contact

Downloads